Automatic Labeling Machine Labeling Instability Is The Main Reason

Automatic Labeling Machine Labeling Instability Is The Main Reason

When the equipment is in operation for a period of time, the possibility of large failure is low, and it is often a problem that is easily ignored, resulting in poor use effect and affecting labeling. The common problem is that labeling does not ask, once the stability is not enough will lead to partial labels skew, or even weak adhesive. Then the automatic labeling machine labeling instability is the main reason?

1. Problems of compression device. If the belt pressing device of the automatic labeling machine is not pressed or loose, the position of the belt will change accordingly and never become loose. In this case, the label can be pressed to solve the problem.

2. If the traction part of the automatic labeling equipment slips or is not pressed tightly, the backing paper will stay in the fixed position and will not be driven to use. In this case, the backing paper is naturally unstable, and it is likely to pull the label sideways.

3. When working in the factory, it is normal for the objects to be pasted to have different shapes or different positions of the labels, which will lead to unstable labeling. In particular, the long - term operation of the equipment itself is not good.

4. If the labeled object is not in the same direction as the label, instead of the same parallel line, it will lead to unstable labeling. Just adjust it.

5. If the attached object is not at the designated position of the equipment, it may not be able to ensure the smooth rotation of the station. In this case, if the attached object is not fixed, the label will be unstable, which is not too serious.

6. Due to unstable labeling, the position of labeling can be adjusted appropriately. Due to the different items being promoted, the Angle and position of labeling can be adjusted according to the size of the items, which can not only alleviate the instability of labeling, but also reduce the rate of labeling errors.

The above six labeling methods are the main causes of the instability of the automatic labeling machine, which is naturally related to the quality of the equipment. Labeling instability is not a major fault and can be resolved by itself. If the labeling of new equipment is unstable,