Causes Of Labeling Machine Failure

The labeling machine fails during use, what should I do? What is the cause of the failure? Below, follow the editor to understand clearly. 

Mechanical reasons are divided into two types: static and dynamic:

1. The static reason is the shaking of the header. Solution: Secure the headers by tightening the headers and adjusting the mounts to avoid wobbling.

2. The specific reasons for dynamics: the product swaying on the conveyor, the solution: by reducing the guide gap, to avoid the product swaying on the conveyor; 3. The standard matches the product speed, the solution: by adjusting the traction frequency or conveying speed, When the product reaches the labeling position, release the label.

Electrical reasons include detection and power:

1. The specific reasons for the detection are: the stop watch is inaccurate, the solution: reset the standard measuring electric eye, and let the labeling machine stop the standard after the product is labeled.

2. The measured object is not accurate, the solution: adjust the measured object. The electric eye and amplifier can accurately detect the labelled product and produce the label accurately.

3. The common power source is abnormal transmission. Solution: Check and tighten drive components to ensure proper operation of the labeling machine.

The reason for the product has both the label and the product

1. A common label problem is that the label spacing is not up to standard. Solution: Select the tabs with the tab spacing to match the tabs.

2. A common product problem is that the product accuracy error is too large. Solution: Check and adjust the accuracy of product dimensions to ensure that the label is attached to the product in a fixed position when the label is applied.