What Are The Key Factors That Influence The Service Life Of The Round Bottle Labeling Machine

Companies are not charities and naturally know the ratio between giving and receiving.Factories invest a large price to buy round bottle labeling machine, will naturally measure its use value and investment value.The longer the service life of the equipment, the lower the failure rate and the higher the cost of investment recovery.Then what are the relevant factors that affect the service life of the labeling equipment?

1. Equipment quality

The round bottle labeling machine is made of self-adhesive paper, and there is no residual glue in the labeling process, and it is clean and hygienic, which is also the main reason why many enterprises choose this equipment.But a good piece of equipment is made from many parts.The quality and process performance of each component determine the overall service life of the equipment.Any component problem, should be timely adjusted or replaced, so as not to affect the overall operation of the equipment.

2. Daily maintenance and maintenance

The installation environment should be paid attention to, and the equipment should be well prepared to prevent moisture and exposure to the sun, so as to ensure that the temperature of the processing environment is suitable, so as to avoid danger in the operation of the equipment.The method of daily repair and maintenance of the equipment is very simple, which does not need careful daily management.Regular inspection on the oil is good, of course, to combine with the equipment's own use and decided.In addition, in the process of equipment use, as far as possible to remove the relevant obstacles, to avoid parts block and burn out the motor.If the equipment is not used for a long time, the dust on the surface of the equipment should be cleaned and the power must be disconnected.

Normally, the general service life of the round bottle labeling machine is about 7 years. If properly maintained, it can be used for at least 10 years. Of course, this does not prevent the r&d technology and level of the equipment from constantly improving during this period.If you want to increase the service life of the equipment, you have to consider the appropriate maintenance program.However, it is important to note that the equipment failure cannot be handled by itself easily, so as not to damage the precision of the parts.Although the maintenance personnel charge expensive, but the equipment usually does not appear too big problems, professionals know how to repair equipment.