Automatic labeling machine fault detection and maintenance work

The automatic labeling machine is a kind of mechanical equipment that sticks the label to the preset position for packaging. The automatic labeling machine is composed of supplying/taking labels, printing, gluing and interlocking devices, so how to do a good job in fault detection And what about maintenance work?

 Find the cause of the problem


     If the automatic labeling machine is distorted during the labeling process, or the label is easy to move, the reasons for this problem may be the following:


     1. It is caused by the wrong position of the operator's station during the labeling process, or too much glue is applied.


     2. If the labelled product is not placed in the correct position, it will cause the phenomenon of sticking crooked or moving during labeling.


     3. It is also not ruled out that the position of the stock transfer and the label brushing device are not adjusted properly. If the friction strip is damaged, it will also affect the labeling effect.


     4. The device for blowing the label should not be too dirty.

How to solve


     1. Adjust the standing position when labeling, choose the most suitable position, and then adjust the glue scraping device to ensure a moderate amount of glue.


     2. Adjust the product packaging box or product packaging bag to ensure the normal position, adjust the drum and friction strip, or replace the bottle star wheel device to keep the air outlet device hygienic and ventilated.


     The above is about the fault detection and maintenance methods of the automatic labeling machine. Only by operating and maintaining according to the above methods, can the service life of the automatic labeling machine be better increased and failures can be avoided.