Automatic labeling machine label warping solution

Increase the viscosity of the label, and try to make the label firmly attached. 

To achieve this effect, the following aspects should be considered:

(1) Improve the surface quality of the attached hose.

(2) Control the labeling pressure in the labeling process.

(3)Control the temperature in the labeling process.

Try to use soft label materials, and good label ductility will greatly improve the warping standard.

Change the shape of the label.

Make the bottom end of the label into an arc, and try to avoid the sealing deformation area. Of course, the arc can not be opened too deep, otherwise due to the problem of the label itself easy to cause wrinkles, increase unnecessary trouble. For special sealing, the shape of the label should be changed accordingly, which can not only avoid warping but also increase the aesthetic feeling.

Eliminate the influence of static electricity.

The labeling process is easy to produce static electricity, which will affect the labeling effect, appropriately raise the humidity of the labeling site, there will be a certain improvement, the use of ion fan is also an effective solution. Automatic humidity CONTROL is provided inside the labeling machine, which can separately control the cleanliness of the equipment, so as to keep the labeling away from dust and improve the quality of labeling products. In this way, there is no longer warping label phenomenon in the process of labeling, to achieve visual effects.