Automatic labeling machine warping problems and solutions

1. If the automatic labeling machine has the problem of warping the label, we need to check that the concentration of the label is too low. If the concentration of the label is too low, we need to increase the concentration of the label, thereby increasing the firmness of the label.

2. Use labels with better ductility, and good ductility can reduce the phenomenon of label warping.

3. The surface of most labels is polished, try to choose labels with better surface quality, and reduce the labeling accuracy error too much.

4. Static electricity will be generated during the labeling process. When the static electricity is applied to the labeling machine, it will cause the label to warp. We can use a negative ion blower to eliminate static electricity or properly adjust the humidity of the workshop environment, which can greatly reduce the occurrence of label warping.

5. During the labeling process, controlling the indoor temperature can increase the activity of the mucus, thereby reducing the phenomenon of label warping.

6. Adjust the labeling pressure according to different labeling shapes. If the pressure is too small, the label may not be firmly attached. If the pressure is too high, it may cause the labeling item to deform, so it needs to be adjusted slowly to achieve the most good effect.

7. The closer the label is to the bottom of the product, the easier the problem of warping will occur, so try to make the label into an arc label, which can reduce the warping of the automatic labeling machine.

 The above are the reasons and solutions for the warping of the automatic labeling machine. There may be other reasons for the warping of the label. You are welcome to share your valuable opinions here.