Possible failure problems of automatic labeling machine
Sep 02, 2022
The automatic labeling machine replaces manual operation to a large extent and can carry out fully automatic labeling operation. However, there will inevitably be some failures in the mechanical equipment used for a long time. Let's take a closer look at some of the mechanical failure problems that can be solved.
The label is damaged
There are many user reactions that the automatic labeling machine occasionally breaks the label during use, that is, the label is damaged during use. So how should we deal with it? In fact, label damage is generally due to label quality problems. In this case, in addition to replacing the label paper with good quality, the user also needs to pay attention to avoid scratching the label. Once there is a label that can be easily broken, the user needs to pay attention to the controls. Only by guaranteeing the quality of labels, the labeling machine can run smoothly.
The labeling deviation
We found that the labeling machine has deviation during use. In fact, it is very likely that the automatic labeling machine has not been repaired for a long time, which is prone to labeling deviation. So how can we solve it? We can straighten the label to make the label go on the right path, and at the same time, adjust the slope of the label to achieve parallel labeling. In addition, during the production process of packaging materials, it is necessary to pay attention to control the deviation of the edge position. Only by guaranteeing the quality of materials can the problem of deviation be completely solved.
The automatic labeling machine appears continuous marking
During the operation of the automatic labeling machine, continuous marking is occasionally found. At this time, if the adjustment of the electric eye still cannot be solved, it means that the equipment has exceeded the applicable scope. Labels that need attention are biased. If the electric eye cannot detect the presence of the label, the position can only be detected by adjusting the position precisely.
In addition, in terms of traction speed, users should also note that the labeling speed can be adjusted on the control panel of the automatic labeling machine, and only a reasonable speed can ensure the labeling quality.
