The reason for the poor labeling precision of the plane labeling machine

Commodities in various industries have high requirements on product performance and outer packaging, and must be more beautiful, clean and tidy, without wrinkles and bubbles. Only in this way can we show the strength of the brand enterprise, which can only be done by fully automatic marking machines and equipment. How to adjust the precision due to the poor marking precision of the plane labeling machine?

   Mechanical equipment reasons, mechanical equipment reasons are divided into two types: static and dynamic.

1. The reason for static data is that the header shakes. The solution is to tighten the header text and adjust the fixing seat to fix the header text and prevent shaking.

2. For dynamic reasons:

The product shakes during transportation. Solution: According to reducing the guiding gap, to prevent the product from shaking during transportation;

The bidding is matched with the product rate. Solution: According to the adjustment of the working frequency of the traction belt or the conveying rate, when the equipment reaches the marked position, it is just right to bid.

     For electrical equipment reasons, electrical equipment reasons include inspection driving force.  The main reasons for detection are as follows:

1.There is an error in terminating the report. Solution: reset the target measurement reset switch, and let the labeling machine terminate the bidding after the product is labeled;

 The precise measurement is wrong. Solution: Adjust the precise measurement reset switch and magnifier, accurately inspect the labelled goods, and accurately bid.

2.The main reason for the driving force is the abnormality of the transmission system. The solution: check and tighten the transmission parts to ensure the normal operation of the flat labeling machine.

3. Commodity reasons, logos and products have two reasons.

1. The problem of substandard marking spacing is common. Solution: Select a development mark that meets the label interval.

 2. The difficult problem of new products is that the precision deviation of the equipment is too large. Solution: Regularly check and adjust the dimensional accuracy of the product to ensure that the label sticker is in the fixed position of the product.

 The explanation about the flat labeling machine is here, thank you for watching, and wish you a happy life.