The working principle of CO2 beverage mixer

Here we would like to introduce that the working principle of CO2 beverage mixer as following,

The CO2 beverage mixer is designed and manufactured to accurately and carefully increase the ratio of water, syrup and carbon dioxide. Using a static mixer with advanced foreign technology, the water layer is thinned, the carbonization time is increased, and the mixing effect of the beverage is ensured; the carbon dioxide is used for reflux deoxidation to save carbon dioxide and achieve the purpose of deoxidation; the pump and the electric appliance constitute a perfect automatic control system. It has the advantages of coordinated action, beautiful appearance, convenient cleaning and high degree of automation. Suitable for mixing a variety of beverages. Soft drinks and hard drinks such as soda, juice and cola.

How the CO2 beverage mixer works:

 The CO2 beverage mixer can be divided into three types according to the mixed type of carbon dioxide and water: membrane type, spray type and spray type. The latter two are used more in actual beverage production.

 The process of the CO2 beverage mixer is as follows: the syrup and the purified water are mixed into the mixing tank through the proportioner, and the pump is input into the carbonation tank, and the carbonization tank is filled with a coil, and the tank is filled with the refrigerant, so that the mixture is mixed. The material is cooled to incorporate enough carbon dioxide. In order to ensure that the carbon dioxide has sufficient contact time with the treated water, the carbon dioxide is charged from entering the carbonation tank. The carbonated material enters the filling machine and is then poured into the container.

Installation and commissioning of CO2 beverage mixer:

 1. Check whether the equipment has serious damage and severe deformation during transportation, and check whether the fasteners of the equipment are loose.

 2. The CO2 beverage mixer is installed horizontally on a firm basis.

 3. Under the guidance of professionals, carry out the correct installation of equipment, electrical control devices and accessories, and check whether the pipeline is unblocked, whether the installed instrument is correct, and whether there is damage. Before starting the equipment, please check whether there are people or objects inside and outside the equipment that affect the normal operation of the equipment to avoid danger.

 4. After installation, please perform a trial run for a few seconds to confirm that there is no electrical short circuit or no abnormal sound before you can perform a short test run.

 6. After the equipment is in normal operation, please check the bearing temperature, running smoothness, sealing, etc., and whether the meter is normal, and confirm the normal operation before feeding.