What to do if the labeling machine fails

In the process of using the labeling machine, there may be equipment failures. If we encounter such problems, how should we deal with them?

1. Adjustment of rubber roller and scraper There should be no gap between the length of the rubber roller and the squeegee. If there is a gap, the squeegee needs to be adjusted by adjusting the eccentric screw. It is actually more appropriate when the gap between the rubber roller and the target plate is between 0.1mm-0.2mm. This can be achieved by adjusting the bearing seat on the lower part of the rubber roller, and if necessary, the bearing on the upper part of the rubber roller can also be adjusted.

2. Adjustment of brush pressing device The overlapping gap of the pressing brush sweeping across the container is 10mm-15mm for a single pressing brush, 5mm-10mm for a combination of pressing brushes, and the distance between the cleaning brush and the sponge is 1mm-2mm. In terms of pressure head adjustment, the bottle pressure head should be 200mm lower when there is no bottle than when there is a bottle.

3. Adjustment of the label box ，the gap between the labeling paper in the standard box and the double bead is between 0.8mm-1mm. If the gap is too large, it is easy to cause the labeling paper to shift in the standard box, and the phenomenon of oblique labeling will appear. If the gap is too small, there will be a phenomenon of poor pushing.

Adjustment of the bottle-in star wheel, bottle-out star wheel and bottle-in screw. When adjusting the bottle-in starwheel, bottle-out starwheel, and bottle-infeed screw, it is necessary to follow the marked bottle-pressing head. When the bottle pressing head just overwhelms the bottle, adjust the bottle feeding star wheel so that the bottle is in the middle of the star wheel groove; when the bottle is in the middle of the bottle feeding star wheel groove, adjust the screw rod so that the bottle feeding side of the screw rod is close to the bottle; When the bottle pressing head just lifts up, the star wheel can be adjusted so that the bottle is in the middle of the groove of the star wheel.

The explanation of what to do if the labeling machine breaks down is the above content. I believe everyone will be more interested in it.