How To Debug The Labeling Machine During The Debugging Process Of The Labeling Machine?

The labeling machine equipment has an automatic labeling function and has a wide range of applications. It is an indispensable part of modern packaging. However, the debugging process of the labeling machine equipment is also a key concern of the big guys. The labeling machine equipment needs to be operated according to the process. If the correct operation method of the labeling machine equipment debugging process is not followed, its labeling rate may be affected.

So what methods do you need to master in the operation and debugging of the labeling machine equipment?

1. Loose fixing screws Adjust the screws on the roll paper tray.

   Remove the plexiglass tray first, and then adjust the rear tray area so that the rear tray area can meet the position of the tray and ensure that it is on the center line of the paper tape. Tighten the screws to install the paper tray and the plexiglass front plate. After fixing the screws, turn the roll paper tray after fixing it to check whether the flexibility is good. If the paper tray is not flexible, you can also perform Adjust accordingly to make it more flexible.

2. Labeling tape

   Before we put on the labeling tape, we should check the equipment rollers of the labeling tape and check whether all the rollers are flexible enough. If we find that there are not enough flexible wheels, we must adjust to the flexibility to continue operating.

   In addition, the wearing method of the automatic labeling machine should pay special attention to the effective operation of the sticker through the sensor to ensure the normal operation of the device.

3. Trial operation

   After adjusting the equipment, we need to carry out trial paste debugging. You can put the bottle on the conveyor belt, and then adjust the bottle bar, and then adjust the distance, and then press the motor switch. Master the correct debugging process of the labeling machine equipment, so that the labeling machine equipment can better meet the full-round labeling or semi-circular labeling of round bottles. The labeling between the bottles is simple to switch and convenient to adjust.