Reasons for the unstable labeling position of the round bottle labeling machine

The round bottle labeling machine can be used to label plastic bottles, PET bottles, glass bottles, metal bottles and other round bottles. It has the characteristics of simple operation, high speed and high precision. There may be some small problems during the operation of the labeling machine. Let's take a look at the reasons and solutions for the unstable labeling position of the round bottle labeling machine.

1. The belt pressing device of the round bottle labeling machine may not be pressed tightly, resulting in the loosening of the label and the inaccurate detection of the electric eye. Squeeze the label to solve.
2. It is possible that the traction mechanism slips or is not pressed tightly, resulting in the inability to take away the bottom paper smoothly. It can be solved by pressing the traction mechanism. If it is too tight, the label will be pulled out. It is better to be able to pull the bottom paper normally. The editor reminds that if the bottom paper that is pulled out is usually wrinkled, it should be pressed too tightly.
3. The shape of the object to be pasted is different or the positioning is different. This requires control of product quality to solve.
4. The object to be attached to the vertical round bottle labeling machine should be placed in parallel with the labeling direction of the round bottle labeling machine. .)
5. The object to be attached should rotate smoothly on the labeling station (be careful not to touch the peeling plate). When the object is too light, the cover should be put down and the object to be attached should be pressed.
6. The round bottle labeling machine produces a single label in the double-label state:
(1) After a label, the workpiece keeps rotating because the delay time for the second label is not set, and the machine is in a state of waiting for the labeling signal of the second label.
(2) After the vertical round bottle labeling machine outputs a single label, the workpiece stops. It is because there is signal interference in the target measuring electric eye (reset the electric eye) or the delay control is abnormal.
The above content is organized by Chaoyue Machinery, I hope it will be helpful to everyone. Chaoyue Machinery focuses on the research and development, production and sales of labeling machines. It can provide round bottle labeling and labeling machine series, flat labeling series, hot melt adhesive labeling series, self-adhesive labeling series, etc. Welcome to consult.